Ababil Iran Reconnaissance UAV Airplane Wood Model Free Shipping Large New

Ababil Iran Reconnaissance UAV Airplane Wood Model Free Shipping Large New

Ababil Iran Reconnaissance UAV Airplane Wood Model Free Shipping Large New
This pre-sale model is. Which has a production period of 1 month. If not, since we have our own factory, we can make one for you in a month. This magnificent and Museum-Quality crafted Ababil Iran Reconnaissance UAV Airplane WOOD MODEL. Is finely handmade from kiln-dried Wood Mahogany and skillfully hand-painted by gifted artists. It is 14.18″ in Length with 16.00″ Wingspan, weighing 0.44 pounds, and a package weight of about 2.20 pounds. The picture shown in this listing is part of a set of photos we are using as reference for the production of the models. Each model comes with a wooden stand. Direct from our highly gifted Craftsmen & Artists, Each model is Individually Sculptured and Painted by hand, Not Mass-produced and there is No Reserve! We have been doing business WORLDWIDE for more that 8 years. Amd 052309/ csm 12-01-07. Ababil (Swallow) Unmanned Air Vehicle [UAV] Iran has been attempting to develop a UAV industry, and some of its UAVs were used operationally in 1997 to shadow US Navy operations in the gulf. Iran has developed the tactical Ababil-5, a medium-range reconnaissance and surveillance UAV, the Ababil-T, a short/medium-range attack UAV, and the Ababil-B and -S. Iran recently announced the production of two new variants of its indigenously developed Ababil UAV, one of which, dubbed Ababil-S, was designed specifically for ISR operations. The Ababil Unmanned Air Vehicle [UAV] is a canard configuration. Due to this fact the risk of stall and crash has been reduced by 30%. Accurate aerodynamic design has given it a good stability characteristics with high speed and maneuverability. Ababil like many others does not need a runwayto take off. Instead, it is launched by a pneumatic launcher. In comparison, this launcher is very reliable, safe and easy to use and maintenance. This is a stand a lone system that can be used many times in combat area. It is installed on a Benz-911 truck that also provides the power required to product air pressure for pneumatic syste, the other necessary equipments such as Electric Generator and field maintenance tools are carried on the truck. Ababil can be also launched by rockets. This method of launching is very simple. This system consists of a three point attachment linkage, rockets, a trolly and its base and a detonator. The system is portable and can be easily assembled and disassembled. The aircraft control is provided with an autopilot system that transfers flight information data to the ground station via a datalink system. The system is able to launch the aircraft, perform different maneuvers, fly to30 km range, loiter and simulate air attacks and finally recover the aircraft at a given point. The range will be increased up to 120 Km simply by increasing the output power of the communication system. In ground station, the aircraft position and flight condition is displayed. Using these data, the pilot is able to guide and control the aircraft. The computer system shows the aircraft attitude, engine, speed, fuel consumption and emergency recovery signals. Using radar, the tracking and the reading angle to ground station all times during flight. CCD TV camera I. Charge (Flare) Miss distance indicatore M. I0 this is a system that works based on the acoustic measurment. The distance of the fired bullets from the aircraft geometric center and bullet motion path are measured by the system. This information is displayed in ground station, providing the training officer to correct the targeting operation until an appropriate level of accuracy is reached. The parachute recovery system has been chosen so that the aircraft can be recovered in any condition. The parachute is designed and manufactured according to MIL-STD by Iran Aircraft Manufacturing Industries (HESA). It is a cross type parachute which provides a descent rate of 4 m/s. Using this parachute, the aircraft is recovered safely without any serious damage due to wind, the parachute is released immediately after it touches down. Using skids, also provides the possibility of conventional landing on a runway. Specifications wing span 325 cm wing airfoil section NACA -4412 wing area 1.76m² canard span 168.8 cm canard area 0.35 m² canard airfoil section NACA-4412 vertical fin NACA-0012 Length overall 288 cm Height overall 90.88 cm Body diameter 25 cm propeller Diameter 61 cm Max. Launching weight 83 kg Max. Payload weight 40 kg Launching speed 64 Knots Cruise speed 165 Knots For longer than 5 km range a tracking system is essential. Endurance is 1.5 h (Can be increased) Engine Type WAE-342 No. Of cylinder 2 cylander Engine volume 342 cc Max. Power 25 hp Max. Thrust 65-70 lb Fuel tank capacity 17 lit Vanckle Engin e p 73 rotary engine Engine volume 208 cc chamber size Max. Power 30 hp Max. After purchasing, pay instantly through! Payments are preferred because they are SAFE & SECURE. We are a Premier Merchant, both Verified and Confirmed. This item is in the category “Collectibles\Transportation\Aviation\Military Aircraft\Desk & Shelf Models”. The seller is “myasianart” and is located in this country: PH. This item can be shipped worldwide.
  • Country/Region of Manufacture: Philippines
  • Transportation Type: Aviation
  • Product Type: Collectibles
  • Material: Wood
  • Type: Aircraft Model
  • Aircraft Type: Multirole Plane

Ababil Iran Reconnaissance UAV Airplane Wood Model Free Shipping Large New

About the author /