X_16_Bell_Sharkit_X16_Airplane_Wood_Model_Free_Shipping_01_ylxu
x-16

X-16 Bell Sharkit X16 Airplane Wood Model Free Shipping

X-16 Bell Sharkit X16 Airplane Wood Model Free Shipping

X-16 Bell Sharkit X16 Airplane Wood Model Free Shipping
This pre-sale model is. Which has a production period of 1 month. If not, since we have our own factory, we can make one for you in a month. This magnificent and Museum-Quality crafted Bell X-16 Sharkit Airplane WOOD MODEL is finely handmade from kiln-dried Wood Mahogany and skillfully hand-painted by gifted artists. It is 6.00″ in Length with 11.00″ Wingspan, weighing 0.44 pounds, and a package weight of about 2.20 pounds. The picture shown in this listing is part of a set of photos we are using as reference for the production of the models. Each model comes with a wooden stand. Direct from our highly gifted Craftsmen & Artists, Each model is Individually Sculptured and Painted by hand, Not Mass-produced and there is No Reserve! We have been doing business WORLDWIDE for more that 8 years. Bell X-16 The Bell X-16 was an aircraft designed as a high altitude reconnaissance jet aircraft in the United States in the 1950s. A mockup of the X-16 was built, but the project was cancelled in favor of Martin RB-57 before any X-16 aircraft were completed. The designation of X-16 was a cover to try to hide the true nature of the craft from the Soviets during the Cold War. Development During the second half of 1953, Fairchild, Bell, and Martin Aircraft conducted high-altitude reconnaissance aircraft design studies for the U. All three designs used Pratt & Whitney J57-P19 engines. The Bell (X-16) and Martin (B-57D) designs were chosen for further development. The Bell design was designated the X-16. The X-16 project was cancelled by the Air Force in favor of Martin RB-57 in 1956. A full-scale X-16 mockup was completed and one aircraft was partially completed. It was designed as a high-altitude long-range reconnaissance aircraft. A total of 28 aircraft were ordered, but none were completed. The first X-16 was about 80-percent complete when the program was cancelled in 1956. The X-16 design was breaking new ground with its design. Its wing was extremely long with a high-aspect ratio. It was significantly lighter and more flexible than any in existence at that time. The entire aircraft was made as light as possible to fulfill its mission of a 3,000-mile unrefueled range at a 70,000 foot altitude. Although no X-16 was ever completed, it made contributions to aircraft design with its lightweight design. It was also a driving force behind the development of the high-altitude J57 jet engine that would later power the U-2 and other aircraft. Operational history None completed. Program cancelled in 1956. Aircraft serial number 28 ordered, none completed. Specifications (X-16, as designed) General characteristics Crew: one, pilot Length: 60 ft 10 in (18.55 m) Wingspan: 114 ft 10 in (35 m) Height: 17 ft 1 in (5.2 m) Wing area: 1,099 ft² (102.19 m²) Empty weight: 23,280 lb (10,582 kg) Loaded weight: 36,124 lb (16,420 kg) Powerplant: 2× Pratt & Whitney J57-PW-37A turbojets, 4,520 lbf (20.11 kN) each Performance Maximum speed: 480 knots (553 mph, 885 km/h) Range: 2,867 nm (3,319 mi, 5,310 km) Service ceiling: 71,832 ft (21,900 m) Wing loading: 33 lb/ft² (160 kg/m²) Thrust/weight: 1:0.55. After purchasing, pay instantly through! Payments are preferred because they are SAFE & SECURE. We are a Premier Merchant, both Verified and Confirmed. This item is in the category “Collectibles\Transportation\Aviation\Military Aircraft\Desk & Shelf Models”. The seller is “myasianart” and is located in this country: PH. This item can be shipped worldwide.
X-16 Bell Sharkit X16 Airplane Wood Model Free Shipping

About the author / 

admin